27
2
1
3
4
5
6
7
8
4-3. Mounting the Primary Lens
The following lens units can be used with the iS10.
Highlite Series projector lenses: TL-1ZHX, TL-2ZX, TL-4Z
DLP-CINEMA lenses for the iS10: CL-2ZX, CL-4ZX
Normally, please use approved DLP-CINEMA lenses for the iS10.
As a special case, Highlite Series lenses can be used; however,
note that these lenses should not be used when a high-contrast
image is desired.
Contact your dealer for more information.
Method 1. Mounting DLP-CINEMA Lenses
햲
Loosen the 2 screws of the lens hood and remove
the lens hood.
햳
Remove the rubber at the projector side surface.
Once the rubber is removed, a lens fastening screw is acces-
sible inside. Please loosen this screw.
햴
Align the hole of the lens side to the axis of the
lens mount and attach.
햵
Tighten the lens fastening screw until the lens is
fastened.
햶
Attach the rubber to the lens fastening screw holes.
햷
Attach the connector.
햸
Attach the dust prevention cover (sponge) to the
lens. (Supplied with the projector.)
햹
Attach the lens hood and tighten the screw.
