NEC FA Series Installation And Maintenance Manual Download Page 88

Page: 88 / 131

English

- 86

Replace the power unit 2 (slave).
Use the screws you have removed to secure the power unit.
Tightening torque: 3 ± 0.5 kgf•cm

Replace the power unit 1 (master).
Use the screws you have removed to secure the power unit.
Tightening torque: 3 ± 0.5 kgf•cm

Remove the two screws securing the power unit.
Use a Phillips screwdriver (No. 2).

The FE series power supply unit is only on the bottom side.

Replacing the receiving card

Remove the receiving card from the hub board.
Remove the four screws securing the receiving card, and then remove the receiving card from the hub board.

Install the receiving card so that the

arrow is orientated to the left.

Hub board

Receiving card (slave)

Receiving card (master)

Remove the four screws.
Use a Phillips screwdriver (No. 1).
Tightening torque: 3 ± 0.5 kgf•cm

The FE series receiving card is (master) only.

Summary of Contents for FA Series




































































































































Search results

Summary of Contents for FA Series

Reviews:

Related manuals for FA Series

Brands by name

Popular brands

NEC FA Series, Installation And Maintenance Manual

Search results

Summary of Contents for FA Series

Reviews:

Related manuals for FA Series

Brands by name

Popular brands