English
- 70
(7) Click “Save Calibration Coefficients to Receiving Card”.
The pop-up message, that the data has been successfully stored to the Receiving cards, will appear.
Result: The screen with the exchanged Pixel cards should look calibrated now.
(8) Click on “Save to HW” button and go back to main window by clicking “X” button.
(9) Check the calibration-state in the bottom left corner of Screen Calibration window:
Enable/Disable Calibration.
(10) If calibration-setting “Disable Calibration” is chosen, switch to “Chroma Calibration” (c) to enable
calibration and click on the “Save” button (d).
Result: While switching you will already see calibration effect.
(c)
(d)
(11) Close Screen Calibration windows by clicking on the “X”.
Result: The Screen Calibration has been finished for both screens.