English
- 6
FE series
Name
Description
Interface connectors
Input and output connectors for the signal and AC power.
12
Signal input/output
To input the signal from the LED controller or the previous LED module.
When a signal is input into
1
, the signal is output from
2
.
When a signal is input into
2
, the signal is output from
1
.
34
Power input (output)
When AC power is input into
3
, AC power is output from
4
.
When AC power is input into
4
, AC power is output from
3
.
Do not input AC power into both
3
and
4
.
5
Status lamp (red)
Lights up when power is on.
6
Status lamp (blue)
Not functioning with this device.
7
Status lamp (green)
Flashes at intervals of approximately 4 seconds when no signal is input.
Flashes at intervals of about 1 second when a signal is being input.
8
Test button
Used to display the test patterns. The displayed pattern changes each
time the test button is pressed.
The signal from the LED controller must be interrupted to display a test
pattern.
9
Handle
Use the handles when carrying and installing the cabinet.
0
Guide pin
Used to align the cabinets when installing them on top of each other.