NEC FA Series User Manual Download Page 39

Page: 39 / 87

ASSEMBLE COMPONENTS

Notice

Read the safety guidelines, which are included in the delivery. Follow them strictly to ensure
safety and a high-performance LED system!

6.1

Install Frame Supports for Wall Mounting

This section is a guide to the mounting of the frame support and describes the following in
more detail:



Prepare the support structure according to the installation site requirements.



Prepare the wall for installation.



Then fix the structure on its designated place according to the static requirements.

Table 7: Frame Support – Installation requirements

No. of People

Tools

Ladder/ elevated working platform

Tools for mounting (e.g. hammer,

screwdriver, Allen key, jaw spanner)

Drilling equipment (e.g. drilling machine

and fitting attachment/head)

depending on mounting surface,

wall material/condition

Mounting material (screws, dowels etc.)

depending on



overall weight of chosen screen

system



mounting surface, wall

material/condition

Measurement tools (e.g. rule, spirit level)
Alignment bar

Included in delivery, flat black bar

Equipment

See for 3.3 Framesets for Bundles specifications related to:



Frameset for LED-FA012i2-110 and LED-FA019i2-110 (4×4 Modules)



Frameset for LED-FA015i2-137 (5×5 Modules)



Frameset for LED-FA019i2-165 (6×6 Modules)

Prepare the Wall Surface



Remove debris and clean the wall surface.



Measure the dimensions for the bundle according to wall frame specifications for the target

frameset: 4×4, 5×5, 6×6.

Notice



Ensure proper ventilation of the LED Wall. For more information, see 3.6 Ventilation
Requirements.



Consider the cable plans, see 14.1 Cable Plans and ensure the cables can be placed
properly.

Summary of Contents for FA Series
























































































Search results

Summary of Contents for FA Series

Reviews:

Related manuals for FA Series

Brands by name

Popular brands

NEC FA Series, User Manual

Search results

Summary of Contents for FA Series

Reviews:

Related manuals for FA Series

Brands by name

Popular brands