© NEC Corporation 2019 52
7
GETTING STARTED
After mounting the LED Wall, check all cable connections and ensure they are connected
according to 14.1 Cable Plans. The cable plans also include the connection between a computer
and the video controllers.
7.1
Info on the Connection Setup
Warning!
Only trained personnel, such as electricians or NEC personnel,
may connect the internal power supply to mains power supply.
Power input for the LED Wall is provided by connecting the Power bar to the electric power
system of the building. Ensure there is a possibility to switch the power for the LED Wall on
and off.
Data input is provided by connecting the Power bar to a NovaStar Controller. The NovaStar
Controller is connected to a content computer, which provides the content data, and to a
service computer, which provides data about how the content is displayed on the screen.
Notice
The NovaStar Controller is no product of NEC DISPLAY SOLUTIONS.
For detailed information on the NovaStar Controller, see the respective manual
for NovaStar Controller MCTRL660 PRO. Download the current version at:
https://www.novastar.tech/download/download-controller/
7.2
Install Controller Software NovaLCT
To configure and check the functions of the controller, you need to install the software
NovaLCT. The software installation package is delivered via USB flash drive.
The software allows you to perform screen configuration, brightness adjustment, calibration,
display control, monitoring, etc. To install the software, follow the steps below:
Connect the delivered USB flash drive to your computer.
Open the USB flash drive.
Navigate to the executable installation file
NovaLCT.exe
.
Click the
NovaLCT.exe
file to start the installation of the software.
Follow the instructions of the installation wizard to complete the software installation.
If the firewall prompt appears, allow the installation.
Notice
Deactivate the antivirus software during the installation.
