![background image](http://html1.mh-extra.com/html/nec/express5800-r120g-2m/express5800-r120g-2m_user-manual_3944086059.webp)
1. Installing Internal Optional Devices
Express5800/R120g-2M User’s Guide
59
Chapter 2 Preparations
Installation
1.11.5
Follow the steps below to install a DIMM.
1. See steps 1 to 6 in
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
2. Open levers on left and right sides of
DIMM slot, and remove the dummy cover.
Note
Keep the removed dummy cover for future use.
3. Push the DIMM straight into the slot.
When a DIMM is inserted into the slot, the
lever automatically closes.
Important
Make sure the orientation of the DIMM. The DIMM has a notch, preventing
being incorrectly inserted.
Do not apply too much pressure when you push a DIMM into the slot.
Doing so can damage the socket or terminal part.
4. Continue to install or remove internal optional devices, mount and connect the server, and turn on the
server.
5. Confirm that no error messages are displayed in POST screen.
If any error messages are displayed, see
Chapter 3 (1. POST Error Message)
in "
Maintenance Guide
".
6. Run BIOS Setup Utility, and select
Advanced
Memory Configuration
Memory Information
.
Make sure the capacity of added DIMM is displayed properly.
See
Chapter 2 (1. System BIOS)
in "
Maintenance Guide
".
7. Select
Advanced
Memory Configuration
Memory Retest
, and set
Yes
.
8. Select
Server
Power Measurement Policy
, set
One Time
, and then select
Save Changes and Exit
.
9. Set the size of Paging File to the recommended size (1.5x total memory size) or more.
If using a Windows OS, see
Chapter 1 (6.1 Specifying Memory Dump Settings (Debug Information))
in
"
Installation Guide (Windows)
".
For other OS, follow the manual of the OS.
Key
Notch