4. Names and Functions of Parts
Express5800/R120g-2M User's Guide
31
Chapter 1 General Description
4.7
Status Indicators
4.7.1
POWER LED ( )
POWER LED indicates power ON/OFF status of the server.
POWER LED pattern
Description
On (green)
The server is normally powered on.
Off
The server is off-powered.
The server is in halt status.
4.7.2
STATUS LED 1,2 ( )
While hardware is operating normally, STATUS LED 1 lights green. STATUS LED 2 is off. STATUS LED 1 is
off or STATUS LED 2 lights/flashes amber if there is a hardware failure.
Tips
If NEC ESMPRO is installed, you can view error logs to check the causes of
failures.
If the LED indication does not change even if the action below is performed, contact your sales
representative.
STATUS LED pattern
Description
Action
STATUS LED 1 STATUS LED 2
On (green)
Off
The server is operating normally.
On (green)
On (amber)
Initialization of BMC is in progress.
Wait until initialization of BMC completes. If
the status remains the same after several
minutes pass, contact your sales
representative.
Blinking (green) Off
Memory is in a degraded state.
Check the electrical system such as power
cords. If there is no problem with the system,
contact your sales representative.
Operating while CPU error is detected.
In redundant power configuration, power is
not supplied to either of power unit.
Off
Off
The power is off.
If the power is not on, Turn on the server. If
POST is in progress, wait until POST
completes. If DUMP switch is pressed, wait
until the memory dump is completed.
If a problem persists after taking these actions,
contact your sales representative.
POST is in progress.
Memory dump is being requested.
Note: It remains green if the dump is caused
by software.
CPU was not recognized.
Watchdog timer expired.