1. Turning on the Server
Express5800/R120g-2M User’s Guide
134
Chapter 3 Setup
1.
Turning on the Server
Pressing POWER Switch at the front of the server turns on the server.
Turn on the server by using the following procedure.
Tips
Wait for at least 30 seconds before turning on the server after turning it off.
1. Turn on a display, an Uninterruptible Power Supply (UPS), and other peripherals.
2. Remove Front Bezel.
3. If STATUS LED is lighting green or amber, wait until it goes off.
4. Press POWER Switch at the front of the server.
POWER LED is turned on green and after a while, logo appears on the display.
Important Do not connect or disconnect USB device while POST is running.
While logo is being displayed, the self-diagnostic program (POST) runs and diagnoses the hardware. For
details, see
Chapter 3 (1.1 POST)
.
POWER Switch