![background image](http://html.mh-extra.com/html/nec/express5800-53xi/express5800-53xi_user-manual_248520074.webp)
2. System BIOS Setup
Express5800/53Xi, Y53Xi User's Guide
74
Chapter 3 Setup
2.4
Cases That Need Using SETUP
Only if a case applies to any of following cases, use SETUP to change settings which was set as factory setting.
Other than cases described below, do not change the settings. All of the factory settings are described in
Chapter
2
(
1. System BIOS
) in
Maintenance Guide
.
Category
Description
To be changed
Remark
Basic
Change date and time
[Main]
→
[System Date]
[Main]
→
[System Time]
You can set date and time by
an OS feature.
On/Off NumLock at power
ON
[Boot]
→
[Bootup NumLock State]
On/Off the function to
display the NEC logo
during POST
[Boot]
→
[Quiet Boot]
You can press <Esc> key to
hide the logo.
Use Deep Sleep mode
[Advanced]
→
[Advanced Chipset Configuration]
→
[Deep Sleep]
[Wake On Ring] must be set to
[Disabled].
Boot
Change boot priority of
devices
[Boot]
→
Specify the boot order.
When you use
EXPRESSBUILDER, set
CD/DVD to the highest
priority.
Power on/off the
workstation via network
(Wake On LAN)
[Advanced]
→
[Advanced Chipset
Configuration]
→
[Wake On LAN/PME]
→
[Enabled]
NEC ESMPRO Manager is
required.
Use remote power-on
feature
[Advanced]
→
[Advanced Chipset Configuration]
→
[Wake On LAN/PME] / [Wake On Ring]
Security Set
password
[Security]
→
[Administrator Password]
→
Enter password
[Security]
→
[User Password]
→
Enter
password
(Set Administrator password first, then
User password.)
There are two levels of
password: Administrator and
User. With the User password,
system parameters available
for viewing and changing are
limited.
Disable POWER/SLEEP
switch/
[System Hardware]
→
[Power Switch Inhibit]
→
[Enabled] (disable)
Disabling POWER/SLEEP
also disables forced
power-off.
Power linkage
with UPS
Always turn on the
workstation when UPS
supplies power.
[System Hardware]
→
[AC-LINK]
→
[Power On]
If the workstation is
powered off by pressing
the POWER/SLEEP
switch, keep the power
OFF even when UPS
supplies power.
[System Hardware]
→
[AC-LINK]
→
[Last State]
Setup
Teaming
Change AMT setting.
(Enable ME BIOS
Extension.)
[System Hardware]
→
[ME BIOS Extension]
→
[Enabled]
See
Chapter 2 (2. AMT
Configuration)
in
Maintenance
Guide
for details of ME BIOS
Extension.