background image

Précautions pour l'usage (il est recommandé de bien lire ces instructions) 

 

 

Express5800/53Xi, Y53Xi User's Guide 

22

Utilisation de l'alimentation électrique et du câble d’alimentation 

 

 

AVERTISSEMENT

 

 

 

 

 

Ne saisissez pas la prise d’alimentation avec une main mouillée. 

Ne déconnectez pas/ne connectez pas la prise avec des mains mouillées. Si vous ne respectez pas cette 
observation, une décharge électrique risque de se produire. 

 

 

 

 

 

Ne connectez pas le fil de mise à la terre à un tuyau de gaz. 

Ne connectez jamais le fil de mise à la terre à un tuyau de gaz. Si vous ne respectez pas cette observation,
une explosion de gaz ou un incendie risque de se produire. 

 

 

 

 

 

Ne connectez pas ou ne déconnectez pas un fil de mise à la terre avec le câble d’alimentation du 
poste de travail branché à une source d’alimentation. 

Assurez-vous de mettre hors tension le poste de travail et de débrancher le câble d’alimentation de la prise 
de courant avant de connecter ou déconnecter n'importe quel fil de mise à la terre vers le/à partir du poste 
de travail. Si le poste de travail est désactivé mais son câble d’alimentation est branché à une source 
d’alimentation, en touchant le fil de mise à la terre, vous risquez de causer une décharge électrique ou un 
incendie à la suite d'un court-circuit. 

 

 

 

 

ATTENTION

 

 

 

 

 

 

 

 

 

Branchez à une source d’alimentation appropriée. 

Utilisez une prise de sortie mise à la terre avec la tension spécifique. L'utilisation d'une prise de sortie avec 
une tension différente de celle spécifiée risque de provoquer un incendie ou une fuite de l’alimentation. 

N'installez pas le poste de travail dans un environnement qui nécessite une rallonge. Si vous connectez à 
une prise de sortie qui ne répond pas aux caractéristiques d’alimentation du poste de travail, vous risquez 
de causer une surchauffe, ayant comme conséquence un incendie. 

Si vous voulez utiliser un câble de C.A. doté d’un fil de mise à la terre de Classe 

0I

, assurez-vous de bien 

connecter le fil de mise à la terre, avant d'insérer la prise d’alimentation dans la prise de sortie. Avant de 
déconnecter le fil de mise à la terre, assurez-vous de détacher la prise d’alimentation de la prise de sortie.

 

 

 

 

Ne connectez pas un grand nombre de câbles d’alimentation sur une seule sortie à l'aide de 
rallonges.  

Le courant électrique dépassant le courant nominal surchauffera la prise de sortie, ce qui risque de 
provoquer un incendie. 

 

 

 

 

 

Ne saisissez pas le câble électrique lorsque vous le déconnectez. 

Lorsque vous déconnectez un câble électrique de l’appareil, saisissez le connecteur du câble et tirez-le tout 
droit. En tirant le câble par la partie du câble ou en appliquant une force au connecteur, vous pouvez 
endommager le câble et le connecteur, avec comme conséquence un risque de décharge électrique ou un 
incendie. 

 

 

 

 

Insérez la prise d’alimentation dans la prise de sortie en allant jusqu’au fond. 

La génération de chaleur provenant d'une prise d’alimentation insérée à mi-chemin (avec un mauvais 
contact) risque de provoquer un incendie. De la chaleur sera également produite si une condensation est 
formée sur les lames poussiéreuses de la prise insérée à mi-chemin, ceci augmentant tout risque 
d’incendie. 

 

 

 

 

Summary of Contents for Express5800/53Xi




















































































Reviews: