NEC EXPRESS5800/120Rd-1, Service Manual

Page: 59 / 70

39 Service Guide
12.4
POST Error Messages
Table 12.4 POST Error Messages
On-screen Error Message Description Action
100 Timer Channel 2 Error Timer channel 2 error
101 Master Interrupt
Controller
IDE Master interrupt error
102 Slave Interrupt
Controller
IDE Slave interrupt error
103 CMOS Battery LOW System RAM error due to a
battery failure.
Offset address
Contact your sales representative to
replace the mother board.
104 CMOS Option not Set System CMOS setting error Contact your sales representative to
replace the mother board.
Restart the computer, and then execute
SETUP to correct the setting.
105 CMOS/GPNV Checksum
Bad
System CMOS checksum
error Execute SETUP to correct the setting.
106 CMOS Display Error Display error Contact your sales representative to
replace the mother board.
107 Insert Key Pressed Insert is pressed
108 Keyboard Locked
Message
The keyboard is locked
Release the key.
Reconnect the keyboard.
109 Keyboard Stuck Key A key is held down. Release the key.
Contact your sales representative to
replace the mother board.
10A Keyboard Interface Error Keyboard interface error Reconnect the keyboard.
Contact your sales representative to
replace the mother board.
10B System Memory Size
Error System memory error Install the DIMMs correctly.
Check if all installed DIMMs are under
the same specification.
Contact your sales representative to
replace the DIMMs.
10E External Cache Failure External Cache error Install the CPU (processor) correctly.
Contact your sales representative to
replace the CPU.
110 Floppy Controller Error Floppy disk controller error
111 Floppy A:Drive Error Floppy disk drive A error
Contact your sales representative to
replace the floppy disk drive or mother
board. This server does not support
floppy disk drive B.
113 Hard Disk 0 Error
114 Hard Disk 1 Error
115 Hard Disk 2 Error
116 Hard Disk 3 Error
Hard Disk error Contact your sales representative to
replace the motherboard, SCSI
back-plane, or hard disk.
117 CD-ROM Disk 0 Error CD-ROM Disk error Contact your sales representative to
l th th b d CD ROM