X Service Guide
INSTALLATION, RELOCATION, STORAGE, AND CONNECTION
WARNING
Disconnect the power cord(s) before installing or removing the server.
Make sure to power off the server and disconnect the power cord(s)
from a power outlet before installing/removing the server. All voltage is
removed only when the power cords are unplugged.
CAUTION
Never attempt to lift the server only by yourself.
The server weighs max. 14 kg (depending on its hardware
configuration). Carrying the server only by yourself may strain your
back. Hold the server firmly by its bottom with another person to carry
it.
Do not install the server in any place other than specified.
Do not install the server in the following places or any place other than
specified in this Guide. Failure to follow this instruction may cause a
fire.
!
a dusty place
!
a humid place such as near a boiler
!
a place exposed to direct sunlight
!
an unstable place
Do not install the server on a rack with the cover removed.
Do not install the server on a rack with the cover being removed.
Failure to follow this instruction may reduce the cooling effect in the
server and cause some malfunction and/or dusts to enter the server,
thus resulting in a fire or electric shock.
Do not pinch your fingers with rails or other components.
Be very careful when handling mechanical parts so that your fingers do
not get caught between a rail and another mechanical part or cut by a
rail at installation or removal of the server from the rack.
Summary of Contents for EXPRESS5800/120Rd-1
