NEC EXPRESS 320Lb, User Manual

Page: 79 / 181

3-14 Configuring Your System
Feature Choices or
Display Only Description Your Setting
Size [0] Size of ft Memory is specified (MB)
Start Address - Shows the start address of ft Memory (view
only)
Boot Menu
Use the up or down arrow keys to select a device, then press the <+> or <->
keys to move the device higher or lower in the boot priority list.
Boot Device Priority Menu
Boot Priority Device Description Your Setting
1. ATAPI CD-ROM
Drive Attempts to boot from an
ATAPI CD-ROM drive.
2. Removable
Devices Attempts to boot from a
diskette drive.
3. Hard Drive Attempts to boot from a hard
drive device.
4.
Intel UNDI, PXE-
2.0 (Build 071) Attempts to boot from a PXR
server.
Exit Menu
You can make the following selections on the Exit Menu. Select an option using
the up or down arrow keys, then press <Enter> to execute the option. Pressing
<Esc> does not exit this menu. You must select one of the items from the menu
or menu bar to exit.
Exit Menu
Choices Description
Save Changes and Exit Exits System Setup after saving all changes to CMOS.
Exit Without Saving Changes Exits System Setup without saving setup data to CMOS.
Get Default Value Loads default values for all Setup items.
Load Previous Values Loads previous values from CMOS for all Setup items.
Save Changes Writes all Setup item values to CMOS.