NEC EXPRESS 320Lb, User Manual, Page: 61 / 181

2-14 Setting Up the System
Power ON
Follow the steps below to turn on the power. (A rack-mount model is shown
here for convenience of explanation. However, the steps are the same for a
tower model except that the modules are mounted vertically.
1. Power on the display unit and other peripheral devices connected to the
server.
NOTE: If the power cord is connected to a power controller like a UPS, make
sure that it is powered on.
2.
Open the front bezel (or detach it in the case of a rack-mount model).
3. Each PCI module includes a power button, however only one of the power
buttons will be lit. Press the lit POWER button located on the PCI module.
See Figure 2-6.
The logo appears on the display screen.
POWER button LEDs
Press only the lit POWER button.
Figure 2-6. PCI Module Power Button Location
IMPORTANT: Do not turn off the power before the logo appears.
While the logo is displayed on the screen, the server is performing a power-on
self test (POST). For details, see "Check by POST" described later in this
manual. Upon the completion of POST, Windows 2000 Advanced Server loads.
NOTE: If the server finds errors during POST, it will interrupt
POST and display the error message.