background image

1. Setup Procedure

 

 
 

Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4  Installation Guide (VMware) 

62

Chapter 1  Installing OS 

1.11.2 

 

Installing Additional Packages 

Connect to the ESXi host from Host Client to configure. 

   

Important 

Do not add the ESXi host to vCenter Server until the installation has been completed.

 

 

 

Insert the ft control software installation DVD into the DVD drive of the machine to be connected to the 

1.

ESXi host from the Web browser. 

 

Connect from the Web browser to the ESXi host, select [Virtual Machines] of Navigator, and select the 

2.

ft management appliance from the list. Select the [Console] tab and [Launch remote console], and 
start up the remote console (VMRC). 

 

Select the [VMRC] menu on the remote console screen, select [Removable Devices], [CD/DVD drive 

3.

x], and [x.Connect to x], and connect to the DVD drive in which the ft control software installation DVD 
is inserted. 

 

Log in to ftSys Management Appliance as a root user. 

4.

 

Mount the ft control software Install DVD. When /mnt/cdrom directory exists, the making of the 

5.

directory is unnecessary by mkdir command. 

# mkdir /mnt/cdrom 
# mount /dev/cdrom /mnt/cdrom 

 

Run the installer of additional package. 

6.

• When ftSys Management Appliance is set as the log server 

# /mnt/cdrom/NEC/install.sh 

• When a separate Linux server is set as the log server 

# /mnt/cdrom/NEC/install.sh –a 

 

 

Select a keyboard layout ("us" for English 101 or "jp" for Japanese 106), and press 

Enter

7.

Please choose a keyboard layout: [us(101) | jp(106)] 

Tips 

Select the keyboard layout of the machine in which the Host Client is installed. 

 

 

Select a language (English or Japanese) for NEC ESMPRO report table and enter "E" or "J". 

8.

Please choose a language for ESMPRO alert messages: [E(nglish) | J(apanese)]

 

Note 

If using a separate Linux server as the log server, this message will not appear. 

 

Tips 

NEC ESMPRO Report Table installed in this step is used by NEC ESMPRO Agent. See 

Chapter 2 (1.1 NEC ESMPRO Agent)

 for detail of NEC ESMPRO Agent. 

 

 

The IP address of the ESXi host is displayed. 

9.

Make sure that the IP address shown is correct, enter the root password for the ESXi host, and press 

Enter

ESXi host: xxx.xxx.xxx.xxx 
Enter the root password: 
 

  The message prompting you to configure the log server appears. Enter the IP address of log server or 

10.

the machine name, and press 

Enter

. You can skip this step and set it later. (In that case, see 

Chapter 

3 (1. Steps for Configuring the Separate Log Server)

 

Summary of Contents for EXP320R

























































































Reviews: