![background image](http://html.mh-extra.com/html/nec/exp320r/exp320r_installation-manual_251134036.webp)
1. Setup Procedure
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
36
Chapter 1 Installing OS
The disk selection screen [Select a Disk to Install or Upgrade] appears.
8.
Select the installation destination and take a note of its extent (the underlined part in the image shown
below), and then, press
Enter
.
Note
The storage device name you have written is to be used when selecting an installation
destination for ftSys Management Appliance (see
Chapter 1 (1.9 Installing ftSys
Management Appliance)
).
<When installing ESXi to the internal hard disk drive>
Tips
The installer of VMware ESXi recognizes the built-in disk as a local disk. Therefore, the
inserted built-in hard disk drive appears under the [Local] category.
Important Note the following when reinstalling
VMware
ESXi:
If any data is contained in the destination hard disk drive, the installer does not
display a message to prompt you to save data because the installer of VMware ESXi
cannot recognize the Stratus MPM disk format. Therefore, make sure that the
destination hard disk drive does not contain any data (or save the data, if any)
before installing VMware ESXi.
<When installing VMware ESXi to the external storage>
Tips
The installer of VMware ESXi recognizes the external storage as a remote disk. Therefore,
the inserted built-in hard disk drive appears under the [Remote] category.
Summary of Contents for EXP320R
Page 87: ... MEMO ...