1. Setup Procedure
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Installation Guide (VMware)
19
Chapter 1 Installing OS
1.4
Enabling Fibre Channel
card
The following procedure shows when installing or reinstalling VMware ESXi to the external storage.
Turn on the display and the peripheral equipment connected to the server.
1.
Note
If the power cords are connected to a power controller like a UPS, make sure that it is
powered on.
Remove the front bezel.
2.
Press the POWER switch that is located on the front side of the server.
3.
Note
Make sure that Module POWER LEDs on both CPU/IO modules 0 and 1 are blinking, then
press the POWER switch.
Lift the acrylic cover, and press the POWER switch.
Important Do not turn off the power before the "NEC"
logo appears.
After a while, the "NEC" logo will appear on the screen.
Tips
While the "NEC" logo is displayed on the screen, the server performs a power-on self test
(POST) to check itself. For details, refer to
Chapter 3 (1.1 POST)
in
User’s Guide
.
Note
If the server detects errors during POST, it will interrupt POST and display the error
message. Refer to
Chapter 1 (6.2 POST Error Message)
in
Maintenance Guide
.
POWER switch
Acrylic cover
Summary of Contents for EXP320R
Page 87: ... MEMO ...
