NEC DT730G (CG): ITL-12CG-3, User Manual

Page: 22 / 156

14
1.
• How to Mount Unit
The following shows the procedure for wall
mounting.
STEP 1:
Turn terminal over (key side down).
STEP 2:
Remove the hanger hook from the terminal,
reverse it and reinsert it to the terminal.
STEP 3:
Turn the terminal over, and spread the Tilt
Legs.
Refer to steps 1 through 3 of Removing Tilt
Legs .
STEP 4:
Install the WM-L UNIT on the wall or on the
wall plate.
Select one of the following procedures:
• Mount Terminal on Wall using WM-L UNIT
Attach the WM-L UNIT to the wall using six
screws or using two wall mounted screws.
• Mount Terminal on Wall Plate using WM-L
UNIT
Locate the screw holes on the base and
hang the cover over the screws on the wall
plate.