NEC DT730G (CG): ITL-12CG-3 User Manual Download Page 20

Page: 20 / 156

Note:

When disconnecting the AC adapter, remove the LAN
cable, then disconnect the adapter.

• Attaching Directory Card

The Directory Card can be used to record numbers
dialed often or other information.

Note:

Directory Card (VAL DIRECTORY CARD UNIT) is
optional.

STEP 1:

Attach the Directory Card to the Directory
Card Holder.

STEP 2:

Take the protective sheet off from the
plastic cover.

The surface of the plastic cover is put out.

STEP 3:

Push the Directory Card Holder into the
grooves on the terminal until they snap into
place.

Wall Mounting

Wall mounting the terminal requires the Wall
Mount Unit (WM-L UNIT).

• Required Space

Before drilling, refer to the template below for
required spacing.

Summary of Contents for DT730G (CG): ITL-12CG-3





























































































































































Search results

Summary of Contents for DT730G (CG): ITL-12CG-3

Reviews:

Related manuals for DT730G (CG): ITL-12CG-3

Brands by name

Popular brands

NEC DT730G (CG): ITL-12CG-3, User Manual

Search results

Summary of Contents for DT730G (CG): ITL-12CG-3

Reviews:

Related manuals for DT730G (CG): ITL-12CG-3

Brands by name

Popular brands