![background image](http://html.mh-extra.com/html/nec/dsx-cordless-lite-ii/dsx-cordless-lite-ii_hardware-manual_248429041.webp)
Connecting Extensions and Lines
DSX-40 Hardware Manual
Installation
◆
35
Installation
Connecting Lines
A fully expanded DSX-40 can connect up to 8 analog loop-start lines with built-in Caller ID. The basic Main
Equipment Cabinet provides 4 lines. By adding a 4-Port Line Card you can connect the system to 8 lines.
See
Installing Expansion Cards
(page 25) for more.
To connect lines:
1.
Using
Figure 10: Punch Down for Lines
(page 31) as a guide, plug the installation cable plugs into the
appropriate jacks on the Main Equipment Cabinet.
2.
For each line, run one pair cross-connect wire between the line block and the CPE (customer side) of the
telco’s RJ21X.
3.
Install bridging clips as required.
Figure 15: Installing Analog Lines
25-Pair
Installation Cable
(P/N 808920)
One-Pair
Cross Connect
1093097 - 13
25-Pair Cable
to Central Office
Telco
RJ21X
Line
Block