![background image](http://html.mh-extra.com/html/nec/dsx-cordless-lite-ii/dsx-cordless-lite-ii_hardware-manual_248429050.webp)
Resetting and Initializing the System
44
◆
Installation
DSX-40 Hardware Manual
Resetting and Initializing the System
Resetting the System
To reset the system:
1.
Brie
fl
y press (tap) the
Reset Switch
on the Main Equipment Cabinet.
• The power LED will
fl
ash green, and then “
fl
utter” blue as the system boots.
• After about 45 seconds, the LED will wink off blue continuously and the system will be operational.
• Resetting the system
does not
erase system programming.
Figure 26: Resetting the System
Important
If the system’s RS-232 connection uses twisted pair cable,
before resetting
do one of the following:
•
Make sure the RS-232 cable is connected at both ends (i.e., PC and CPU).
•
If the RS-232 cable is disconnected from the PC, be sure the cable is also disconnected from the CPU.
1093097 - 18
1