NEC Aspire L, Networking Manual

Page: 193 / 256

Programming
22-12 : DID Intercept Ring Group
Networking
◆
183
22-12 : DID Intercept Ring Group
Description
For each DID Translation Table, use Program 22-12 : DID Intercept Ring Group to de Þ ne the
Þ rst destination group for DID calls.
Depending on the entry in Program 22-09-02 and 22-11-04, the incoming calls will route to the Þ rst
destination group by the following:
● Vacant number intercept (vacant number means that there is no phone connected, no station
card installed, or the extension number is not de
Þ ned in Program 11-02)
● Busy intercept
● Ring-no-answer intercept
If the destination is '0', the calls will be forwarded to the trunk ring group de Þ ned in Program 22-11
based on the table assigned to the DID trunk.
Note:
If Program 22-11-05 and 22-11-06 are set, the priority of transferring will be in this order:
Program 22-11-05
☞
Program 22-11-06
☞
Program 22-12.
For busy and no-answer calls, if the Þ rst and third destinations are programmed but the sec-
ond destination is not, the incoming call goes to the third destination after the Þ rst destina-
tion. If the Þ rst and second destinations are not de Þ ned, but the third destination is, the call
goes directly to the third destination (as de Þ ned in Program 22-12).
Input Data
Conditions
None
Feature Cross Reference
●
Direct Inward Dialing (DID)
Level: Aspire S Aspire M/L/XL
IN • Available. • Available.
• Applicable to IP and ISDN Networking. • Applicable to IP and ISDN Networking.
Conversion Table Area Number 01-20
Item No. Day/Night Mode Incoming Group Number Default
01 Aspire S: 1-4
Aspire: 1-8
0
(
No Setting)
1-8 or 1-100
(Incoming Group)
101
(DSPDB
Voice Mail)
102 (In-Skin/External Voice Mail)
103 (Centralized Voice Mail)
1