NEC Aspire L, Networking Manual

Page: 53 / 256

Features
ARS/F-Route
Networking
◆
43
Related Programs
Refer to the Aspire Software Manual (P/N 0893200) for full programming details.
➻
26-01-01 : Automatic Route Selection Service - ARS Service
Enable (1) or disable (0) ARS.
➻
26-02-01 : Dial Analysis Table for ARS/LCR - Dial
Enter the digits (16 digits maximum: 1-9, 0 * #, @; 400 separate entries) for the Dial Analysis
Table which will be analyzed by ARS/LCR. This table will be checked after any programmed
F-Route operations have completed. The system will then refer to Program 26-02-02 and 26-
02-03 to determine the routing for the call. To enter a wild card/don’t care digit, press Line
Key 1 to enter an @ symbol.
It is important to remember that the system checks the table
numbers in numerical order. This means that entries for speci Þ c numbers should be entered
Þ rst (such as your local area codes), then enter the items containing wild card digits. If the
system sees an entry of “2@@” then any table entries which follow will be ignored.
For example, if 268, 269, and 270 are local exchanges, these would be the Þ rst three table
entries which would route according to the settings made in Program 26-02-02 and 26-02-03
for each of the table entries. If the next entry is “2@@”, then the system checks no further in
this program and routes all other “2xx” numbers according to the entries made in Program 26-
02-02 and 26-02-03 for this table entry.
Program Number Title
ARS
26-01-01 ARS Service
26-02-02 Dial Analysis Table for ARS
26-02-03 Dial Analysis Table-Additional Data/Service Number for ARS
26-03-01 ARS Dial Treatments
F-Route
11-01 Numbering Plan
44-01 System Options for F-Route Service
44-02 Dial Analysis Table for F-Route Access
44-04 F-Route Selection for time schedule
44-05 F-Route Table
44-06 Additional Dial Table
44-07 Gain Table for F-Route Access
44-08 Time Schedule for F-Route Service
44-09 Weekly Schedule for F-Route Service
44-10 Holiday Schedule for F-Route Service