manualshive.com logo in svg

NEC Aspire L, Networking Manual, Page: 225 / 256

Share
Download
NEC Aspire L Networking Manual Download Page 225

Programming

45-01 : Voice Mail Integration Options

Networking

◆

215

45-01 : Voice Mail Integration Options

Description

Use 

Program 45-01 :Voice Mail Integration Options 

to customize certain voice mail integration 

options.

Input Data

Level:

Aspire S

Aspire M/L/XL

IN

•

Available.

•

Available.

•

Program 45-01-10 not available.

•

Program 45-01-10 available with software 
4.94+.

Item No.

Item

Input Data

Default

01

Voice Mail Department Group Number

Assign which Extension (Department) 
Group number is to be assigned as the 
voice mail group (non-networked system).
An entry of ‘0’ means there is no voice 
mail installed. When using Centralized 
Voice Mail with Aspire Mail or IntraMail, 
this program and Program 45-01-08 must 
both be programmed with the same group 
number. Otherwise, the audio path may 
not connected properly. 

Aspire S: 0-8

Aspire: 0 - 64 

(0=no voice mail)

0

02

Voice Mail Master Name

Enter the Voice Mail master name 
(non-networked system).

Up to 12 Characters

Voice Mail

03

Voice Mail Screening

Enable/disable the system’s ability to pro-
cess the Call Screening commands (1 + 
extension number) sent from the Voice 
Mail. You should normally 

enable

 this 

option to allow for Voice Mail Call 
Screening. Disable this option if your sys-
tem has been modi

Þ

ed so that extensions 

begin with the digit 1 (e.g., 101, 102, etc.). 
Also see the Flexible System Numbering 
feature.

0 = Off

1 = On

1

04

Park and Page

Enable/disable the system’s ability to pro-
cess the Voice Mail’s Park and Page (*) 
commands. You should normally 

enable

 

this option.

0 = Off

1 = On

1

Summary of Contents for Aspire L

































































































































































































































































Reviews:

No comments