NEC 240K - LT XGA DLP Projector User Manual Download

Page: 75 / 152

E-75

USING ON-SCREEN MENU

⬎

Basic Menu Operation

NOTE: If the "Advanced Menu" item has been selected on the Menu mode, you

get the "Confirmation Change Menu" upon completion of "Custom Menu" edit-

ing. In this case, selecting "Yes" then "Enter" will close all the menus and apply

the changes from the Advanced menu to the Custom Menu. If you select "No" then

"Enter" functions, then all menu items will return to the Advanced menu, but your

changes will still be available within the "Custom Menu" selection. To display the

previously tailored Custom Menu, select "Custom Menu" from the "Menu Mode".

An item "To Advanced Menu" will be added to the bottom of the Custom

Menu.

Selecting this item and pressing the ENTER button will display the "Ad-

vanced Menu" features.

Summary of Contents for 240K - LT XGA DLP Projector

























































































































































Search results

Summary of Contents for 240K - LT XGA DLP Projector

Reviews:

Related manuals for 240K - LT XGA DLP Projector

Brands by name

Popular brands

NEC 240K - LT XGA DLP Projector, User Manual

Search results

Summary of Contents for 240K - LT XGA DLP Projector

Reviews:

Related manuals for 240K - LT XGA DLP Projector

Brands by name

Popular brands