NEC 240K - LT XGA DLP Projector User Manual Download

Page: 63 / 152

E-63

Simple utility software (for computer)

• Dynamic Image Utility 2.0 operable on Windows 98/Me/XP/2000

• Slides can be created by capturing the currently displayed image

• Control screen for displaying lists of slides and editing

* Microsoft, Windows and PowerPoint are registered trademarks of

Microsoft Corporation.

Inserting and Removing a PC Card

Inserting the PC Card

• Hold the PC card horizontally and insert it slowly into card slot with

its top facing up.

• The eject button pops out once the PC card is fully inserted. Check

that the PC card is fully inserted.

NOTE: Do not try to force the PC card into the slot.

USING THE VIEWER

PC card (not supplied)

Summary of Contents for 240K - LT XGA DLP Projector

























































































































































Search results

Summary of Contents for 240K - LT XGA DLP Projector

Reviews:

Related manuals for 240K - LT XGA DLP Projector

Brands by name

Popular brands

NEC 240K - LT XGA DLP Projector, User Manual

Search results

Summary of Contents for 240K - LT XGA DLP Projector

Reviews:

Related manuals for 240K - LT XGA DLP Projector

Brands by name

Popular brands