NEC 2400, Integration Manual, Page: 91 / 168

Issue 2 December 1995
8-3
Administer the Basic Parameters
6. Enter the three-digit message desk number from worksheet A in Chapter
3.
7. Press to confirm the number and move to the next basic parameter edit
form, the CPID PAD STRING form, as shown in the following example:
8. Press to accept the default CPID Pad String number of 0000000 and
move to the next basic parameter edit form, the MWI PAD STRING form,
as shown in the following example:
9. Press to accept the default MWI pad string number of 0000000 and
move to the next basic parameter edit form, the MWI FEATURE form, as
shown in the following example:
10. Set the value for the message waiting feature as listed on worksheet A in
Chapter 2.
The SID defaults to Enable. If you want to turn off the feature, press the left
or right arrow key to change the value to Disable.
11. Press to confirm the information.
You have finished entering the MCI basic parameter information. To return to the
MCI MAIN MENU, press
.
Proceed to the “Assign Extensions and LTNs” section on the next page to
continue the SID configuration.
SETUP CPID Pad String: 0000000
SETUP MWI Pad String: 0000000
SETUP MWI Feature: ENABLE
<- ->1
ENTER
FUNC