REACH
Neato Robotics’ products are “articles” as defined in REACH
Article 3(3) and do not release substances under their
normal use.
The Technical Construction File is maintained at Neato
Robotics UK office
.
The Authorized representative located within the community
is: Neato Robotics, UK Office. The last two digits of the year
the CE Mark was first affixed to Botvac models are 14.
FCC AND INDUSTRY CANADA COMPLIANCE STATMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Caution: Changes or modifications not expressly approved
by Neato Robotics could void the user’s authority to operate
the equipment.
RF Radiation Hazard Warning
To ensure compliance with FCC and Industry Canada RF
exposure requirements, this device must be installed in
a location where the antennas of the device will have a
minimum distance of at least 20 cm from all persons. Using
higher gain antennas and types of antennas not certified for
use with this product is not allowed. The device shall not be
co-located with another transmitter.
The RF antenna used in this device is integral and not
replaceable by the end user. It has maximum peak gain of 2.1
dBi for 2412 – 2462 MHz channels of operations and 0.7 dBi
for 5180 – 5240 MHz channels of operations.
The device for operation in the band 5150–5250 MHz is
only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems..
Industry Canada Notice and Marking
The term “IC:” before the radio certification number only
signifies that Industry Canada technical specifications
were met.
This device complies with Industry Canada’s license-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This
device must accept any interference, including interference
that may cause undesired operation of the device.
LASER:
The Navigation Sensor contains a Class 1 rotating
laser per EN 60825-1 during all procedures of operation.
• Do not aim the laser at other persons.
• Do not look at the direct or reflected beam.
• Always switch the robot vacuum off during changeover
tasks.
• Modifications (changes) or attempts to repair the robot
vacuum cleaner or the navigation sensor are strictly
prohibited and may result in hazardous radiation exposure.
Laser Parameters.
• Wavelength 785 nm
• Pulse Rep Frequency 1.8 kHz
• Pulse Duration 200 usec
• Peak Power 2.1 mW
• Beam Diameter 2.3 mm
• Beam Divergence -1.5 mrad
• Caution – Use of controls or adjustments or performance
of procedures other than those specified herein may
result in hazardous radiation exposure” (or alternatively,
equivalent appropriate warnings).
• IEC/EN 60825-1: 2014
End User License Agreement, Trademarks and Copyright
The Neato Robotics, Inc. End User License Agreement is
available online at NeatoRobotics.com. Neato Robotics
®
,
Botvac
®
are registered trademarks of Neato Robotics Inc.
Other trademarks, trade names and service marks are the
registered and unregistered trademarks, trade names and
service marks of their respective owners.
QNX Software: Neato Botvac Series robots incorporate QNX
Software. © 1982-2008, QNX Software Systems. All rights
reserved.
Disposal.
Disposal of the Product
This symbol on product indicates the product must not
be disposed of with other household refuse. It must be
disposed of and collected for recycling and recovery of
waste EEE. For more information about where you should
dispose of your waste equipment for recycling and recovery
please contact your dealer or distributor from which your
product was purchased.
Disposal of batteries.
This symbol on the battery indicates the battery must
not be disposed of with other household refuse. It must
be disposed of and collected for recycling and recovery
through your local free battery collection system. For more
information about where you should dispose of your battery
for recycling and recovery please contact your dealer or
distributor from which your product was purchased.
REMOVE THE BATTERY FROM THE PRODUCT BEFORE
DISPOSAL AND DISPOSE SEPERATELY IN ACCORDANCE
WITH LOCAL REGULATIONS.
Technical Data.
Input Voltage:
100-240V AC 50/60Hz 45W 0.4-0.8A
Output Voltage:
Max 18V DC 36W 2.0A
Short Circuit and Over Current protection
Battery:
Li-Ion Rechargeable 4200 mAh or 2100 mAh
nominal Voltage: 14.4V
Runtime:
dependent on environment to be cleaned.
Limited Manufacturer’s Warranty Summary
Neato Robotics, Inc. warrants to the original purchaser
(“you” or “your”) that your Neato hardware product
(“Product”), excluding batteries and other consumables,
shall be free from defects in material and workmanship
for 1 year from the original date of purchase. In the case of
batteries, a Warranty Period of six (6) months shall apply
and ‘Warranty Period’ shall be read accordingly throughout
this document. In the case that the product purchased is a
Neato-Certified Refurbished product, a Warranty Period of
three (3) months shall apply and ‘Warranty Period’ shall be
read accordingly throughout this document. In the absence
of proof of purchase, Neato Robotics will take the date of
manufacture plus 90 days to allow for transit and sale as the
date of purchase.
This warranty is void if parts other than Neato Genuine
replacement parts are used including but not limited to
batteries, filters, brushes and boundary markers. Using
unauthorized, apparently compatible items available on
the market may damage your product or create an unsafe
situation.
You may also find the full details of this limited warranty
by selecting your Product in the Support section of our
website at NeatoRobotics.com. Except where prohibited by
applicable law, this warranty is nontransferable and is limited
to the original purchaser and applies only to products
purchased and used in the same country. This warranty gives
you specific legal rights, and you may also have other rights
that vary under local laws. If you are dealing as a consumer
this limited warranty does not affect your statutory rights.
Support.
Visit NeatoRobotics.com for the detailed Manufacturer’s
Limited Warranty and for details on how to obtain support,
purchase replacement consumables.
November 22, 2017
E
ng
lis
h
CLASS 1 LASER PRODUCT
