Neatech PROFESSIONAL REHAB Series, Service Manual

Page: 95 / 220

www.neatech.it
83/203
WARNING
The wheelchair complies with the requirements of ISO 7176-19:2008 and
has been designed and tested for use only as a forward-facing seat in a
motor vehicle.
Compliance with this standard does not preclude using the wheelchair
facing rearward in large accessible vehicles such as autobus.
WARNING
The wheelchair has been dynamically tested in a forward facing orientation
with the ATD restrained by both pelvic and shoulder belts.
WARNING
Both pelvic and shoulder belt should be used to reduce the possibility of
head and chest impacts with vehicle components.
WARNING
In order to reduce the potential of injury to vehicle occupants wheelchair
tray should be removed and secured separately in the vehicle.
WARNING
When possible other auxiliary wheelchair equipment should be either
secured to the wheelchair or removed from the wheelchair and secured in
the vehicle during travel, so that it does not break and cause injury to vehicle
occupants in the event of a collision.