Neatech PROFESSIONAL REHAB Series, Service Manual

Page: 110 / 220

www.neatech.it
98/203
WARNING
In order to calculate the risk for the legrest to crash into the floor the
software assumes that the wheelchair is on a perfectly flat surface far from
any step or obstacle. For these reasons it is very important to not use the
legrest function on a non-flat surface or near steps or obstacles.
AXIS 5 REHAB
Figure 88
Figure 89
Figure 90
MOVE UP
The wheelchair will go in lay-down position and then in
the position shown in Figure 89
An authorized service center is able to adjust the angles
shown in figure. When the movement stops you will
hear a sound.
MOVE DOWN
it is possible to bring back the wheelchair to the default
position shown in Figure 90.