Upload Menu
www.ndtjames.com 21
6. Charge the battery at a moderate temperature. Do not
charge below 0deg C (or < 32deg F).
7. Lithium-Ion batteries suffer from stress when exposed to
heat. Therefore, to lengthen the life of the battery, avoid
elevated temperatures > 30deg C (or > 86deg F).
8. Lithium-Ion batteries may fail when stored for long periods of
time in a discharged state. Thus, before a prolonged storage
period, be sure to apply a charge to the battery. It's
recommended once every 2 months to recharge the battery to
keep it fresh. You should store the Unit (and battery) during
this period at room temperature.
9. Replacing or repair of the battery should be done by a
trained James Instruments technician. Please follow the repair
procedure found
in the manual…. check the “Table of Contents”
in your manual.
Upload Menu
Connect the unit to the correct serial port of the P.C. using the
supplied serial cable. Press the up or down key until you get to the
system Upload menu option. Press “Enter”. The Upload Menu sub
screen should appear.
Figure 16:
Select the upload menu option by pressing “Enter”. The display
should read the following:
Use the up or down arrow key to select a TEST data or a FFT data.
Pressing the left or right arrow key you can select which TEST or
FFT data number you want uploaded. Open the Emodumeter
software on your PC. Press the Upload key on the tool bar or press
