NDS ConductOR, User Manual

Page: 8 / 66

2
1
This manual is designed to assist the user with installation, setup and operation of the ConductOR and its
associated displays. A list of displays that may be used with the ConductOR is in the Compatible Displays
section on the following page.
A blue numbered tab on the side of the page denotes the beginning of a section.
The functional descriptions in this manual are representative of:
ConductOR:
Part Number: 90T0007
Firmware:
Scalar:
58J0039 Version A and later.
Controller: 58C0101 Version A and later.
Manual Part Number 60
G
0368 Rev C
About This Manual
Condition Possible Cause Mitigation
End user cannot view the video
data from a connected video
source Incompatibility with video source
equipment. When video source equipment is
connected to the ConductOR, the end
user must verify that video is passed
from the video source through the
ConductOR and is displayed correctly
on the connected monitors .
External control failure RS-232 communication failure. Control unit from front panel touch
screen.
ConductOR cannot be powered
on. Defective internal power supply Bypass the ConductOR by connecting
the output of the video source
directly to a monitor.
Intended Use and Contraindications
Intended Use:
This device is intended for use in a medical environment to route high quality video and graphic images .
Contraindications:
This device may not be used in the presence of flammable anesthetics mixture with air, oxygen or nitrous
oxide. Also, it is not intended for life support applications.
For mission critical applications, we strongly recommend that a replacement unit be immediately available.