44
User Configuration
Connect your PC to the
ConductOR
via an RS-232 cable. Verify that both are powered on. Launch the
ConfigOR-G2
program, click the
Connect
button and verify that
Connected
appears in the lower left
corner. See example on page 23.
In the
User Configuration
section click the
List
button. If less than four names appear you may add
additional names and passwords. If four names appear, then one or more of the names must be
removed before any names can be added.
Type the new
user name
in the
User Name
window and its password in the
Password
window. Finally,
click the
Add
button to save the name and password.
A single
user name
may be removed by selecting the name in the
User List
then clicking the
Remove
button.
All
user names
may be removed by clicking the
Remove All
button.
Close the
ConfigOR-G2
program, then turn the
ConductOR
off and on. This writes the names and
passwords into the
ConductOR
’s memory. The names and passwords are used with the
ViewOR G2
program.
Note: User Configuration
data overwrites the default user name (
root
) and password (
admin
). If all user
names are deleted, the default user name (
root
) and password (
admin
) are restored when the
ConductOR is turned off and on.
Summary of Contents for ConductOR
