NDC BETA LaserMike LaserSpeed Pro 8500-4, Instruction Handbook Manual

Page: 198 / 348

6-44 LaserSpeed Pro 8500-4 Instruction Handbook: RS-232/RS-422 Communication
Where
<DDD>
is the day of the week (ex. Tue),
<MMM>
is the month (ex. Jan),
<DD>
is the
day of the month (ex. 2),
<hh>:<mm>:<ss>
is the current UTC time (hh is 24hr format) and
<YYYY> is the current year.
When setting the time,
<MM>/<DD>/<YY>
is the current numeric date (Jan=01) and
<hh>:<mm>:<ss>
is the current UTC time (hh is 24hr format).
Example:
Command:
*TIME=01/02/18 18:23:00<CR>
…and then read it back
Command:
*TIME?
Response:
*TIME=Wed Jan 2 18:23:02 2018<CR>
*SNTPHOST
SNTP Server Host Name
*SNTPHOST?<CR>
Read
Response Format:
*SNTPHOST=<hostname><CR>
*SNTPHOST=<hostname><CR>
Set
Factory Default: pool.ntp.org
Where
<hostname>
is the DNS registered host name for the SNTP server. Spaces in the
hostname are not permitted. The SNTP server host name must be registered with the
configured DNS server for the SNTP server IP to be properly resolved from the host name.
If a fixed IP address is to be used for the SNTP server then this setting should be set to an
empty name (ex.
*SNTPHOST=
). The example below configures the LaserSpeed Pro to use
an internet-based SNTP server to update the real-time clock.
Example:
Command:
*SNTPHOST=pool.ntp.org<CR>
…and then read it back
Command:
*SNTPHOST?
Response:
*SNTPHOST=pool.ntp.org<CR>
*SNTPIP
SNTP Server IP Address
*SNTPIP?<CR>
Read
Response Format:
*SNTPIP=<IP><CR>
*SNTPIP=<IP><CR>
Set