4. Connect the Remote Support Modem
6
For the server with an external modem, follow the procedures below.
RJ11 connector
to m odem
Connect to
analog m odem
connection
Connect to
COM 1 port
on server
Connect
to AC
power outlet
25-pin connector
to m ode m
Power supply
connector
to m odem
3
2
1
To install the modem:
1. Connect the enclosed computer interface cable from the 9-pin COM1 port on the server to the
25-pin connector on the modem.
2. Connect the modem power supply cable to the power supply connector.
3. Connect the telephone line cable from the analog modem connection in your facility to the
RJ11 connector on the modem.
4. Plug the modem power supply into the AC power outlet.
5. Place modem on top of the server. The power LED should be illuminated.
