background image

The product described in this book is a licensed product of NCR Corporation.

Adaptec, the Adaptec logo, AHA, Altra, AVA, EZ-SCSISelect, and SlimSCSI are trademarks of Adaptec, Inc. which
may be registered in some jurisdictions. IBM, AT, OS/2, and Micro Channel are registered trademarks of
International Business Machines Corporation. Novell and NetWare are registered trademarks of Novell, Inc.
PhoenixBIOS is a trademark of Phoenix Technologies Ltd.  Windows, Windows NT, MS-DOS, MS, and Microsoft
are registered trademarks of Microsoft Corporation. UNIX is a registered trademark of UNIX Systems Laboratories
in the United States and other countries. PROCOMM PLUS is a registered trademark of Datastorm Technologies,
Inc. All other trademarks are owned by their respective owners. Microsoft Corporation’s license agreement
precludes copying, disassembling, or reverse compiling software programs, or making any backup copies of the
software programs.  You are not authorized to copy program files, or use any backup diskette (made for the
purpose of data backup and recovery from serious Flash failures) on any other system.

It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and
firmware become available. NCR, therefore, reserves the right to change specifications without prior notice.

All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In
some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with
your NCR representative or NCR office for information that is applicable and current.

To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization, and
value of this book.

Address correspondence to:

Systems Information
NCR Corporation
3325 Platt Springs Road
West Columbia, SC  29170

Copyright © 1997
By NCR Corporation
Dayton, Ohio U.S.A.
All Rights Reserved

Summary of Contents for WorldMark 4380

















Reviews: