NCR RealPOS 70XRT, User Manual

Page: 177 / 183

Chapter 16: Converting the MSR to MagTek Emulation Mode P-5
Reverting to USB HID MSR Mode
To revert the USB Mode from USB HID Keyboard back to the default of USB HID
MSR, use the NCR ROM Flasher utility to perform the change.
1. Select the Browse button.
2. In the Files of Type pull ‐ down menu, select All Files (*.*) .
3. Navigate to the USB HID operational mode file ( _USBWedge_Keyboard Off .fop) .
4. Select Open .\
You should see a dialog that indicates whether an existing USB HID device is
located. A sample dialog is as follows:
Devices: 1
PID: 823 rev:2
5. Select the Flash button to initiate the flash process.
You should see a Waiting for reenumeration message while the system waits for the
USB HID mode to update.
The system should indicate that the Device was updated successfully! The data from
subsequent card swipes should now appear as USB HID MSR reports.
Reverting to the Standard USB HID MSR Firmware
To revert to the original (default) USB HID MSR firmware, use the NCR ROM Flasher
utility to perform the change.
6. Select the Browse button and navigate to the MSR firmware file
( msr__USBWedge2Original.fif ).
7. Select Open .
You should see a dialog that indicates whether an existing USB HID device is
located. A sample dialog is as follows:
Devices: 1
PID: 822 rev:2
8. Select the Flash button to initiate the flash process.
During the flash process, you should see a message Flashing the device…
The system should indicate that the Device was updated successfully!
9. Close the ROM Flasher utility.