NCR 7454, User Manual, Page: 183 / 244

Chapter 4: Operating System Recovery 4-21
OS Recovery from a Larger Disk Image
The following procedure should be used to restore an Operating
System when the destination disk is smaller than the source image (i.e.,
OS Recovery was made on a 10 GB source disk, but is being recovered
on a 4.3 GB drive).
1.
Boot the system.
You should see a message during boot indicating that the CD-ROM
has been recognized:
Micro Solutions BACKPACK CD-ROM v0.3
. . .
Booting from BACKPACK CD
Starting MS-DOS
2. Follow the DOS screen prompts. After each entry, you are asked to
confirm your input. You can use
1 or y for Yes , 2 or n for No .
3. Enter No at the Disk verification question.
4. Select which type of recovery you want to perform from the next
menu (normally option #1).
1)
Redo entire disk with the first partition the same size.
2) Redo the first OS partition.
3) Redo the second OS partition.
5. At the Press any key to continue dialog box, press
[CTRL]-C
to abort
the process. When asked
Terminate batch job?
Answer
Y
.
6. From the command prompt, change to drive Z, which is the
location of the Ghost software (CD-ROM drive).
7. Run the Ghost command.
Ghost.exe
8. Press
Enter
.
9. Select
Local
→
Disk
→
From Image
and press
Enter
.