NCR 7350-K978, Kit Instructions, Page: 37 / 43

7350-K978 R6L Upgrade, Narrow Size Core 33
Installing the I/O Box on Bracket
Upgrading the NCR SelfServ™ Checkout (7350) Narrow Core to R6 Lite replaces the
Pocono E-Box with the 7360 I/O Box. To install the I/O Box, follow these steps:
1. Remove the existing 7350 components that need to be replaced. For more
information, refer to Installation Procedures on page 4.
2. Attach the I/O Box on the bracket and then secure using one nut, as shown in the
image below.
3. Connect the cables to the I/O Box.
4. Do the following:
• Install the System Power Supply, if not yet installed. For more information, refer
to
Installing the System Power Supply on Bracket on page 30.
• Install the I/O Box – PSU bracket to the core wall. For more information, refer to
Installing the I/O Box and Power Supply Bracket on the next page.
5. Route the I/O Box cables. For more information, refer to Routing I/O Box Cables on
page 36.