NCR 7193, Owner'S Manual

Page: 98 / 104

Index 7193 Owner’s Guide
August 1998 90
Commands, printer function
add n extra dot rows, 44, 48
align character positions, 44, 53
carriage return, 44, 47
clear printer, 44, 48
enable or disable panel switch, 44, 53
feed n dot rows, 43, 48
feed n print lines, 44, 48
full knife cut, 44, 49
generate pulse to open cash drawer, 44, 53
generate tone, 44, 49
horizontal tab, 44, 47
initialize printer, 44, 51
line feed, 44, 47
partial knife cut, 44, 49
print, 44, 49
print and feed n lines, 44, 53
print and feed n minimum units, 44, 51
read from non-volatile memory, 44, 53
select cut mode and cut paper, 44, 55
select peripheral device, 44, 51
select sensors to stop printing, 44, 53
set absolute starting position, 44, 50
set character right-side spacing, 44, 49
set column, 44, 49
set horizontal and vertical minimum motion units,
44, 55
set horizontal tab positions, 44, 51
set left margin, 44, 54
set line spacing to 1/6 inch, 44, 50
set line spacing to n minimum units, 44, 50
set printing area width, 44, 56
set relative starting position, 44, 52
write to non-volatile memory, 44, 54
Commands, printer status
enable/disable automatic status back, 46, 66
request alternate status, 46, 64
transmit cash drawer status, 46, 63
transmit printer ID, 46, 65
transmit printer status, 46, 65
transmit status, 46, 69
Commands, real time
7193 clear printer command, 76
alternate implementation, 71
first implementation, 70
moving data through the buffer, 71
real time printer status transmission, 46, 76
real time request to printer, DLE sequence, 46, 75
real time request to printer, GS sequence, 46, 75
real time status transmission, DLE sequence, 46, 73
real time status transmission, GS sequence, 46, 73
recognizing data from the printer, 76
rules for using, 71
Commands, sending
using BASIC, 34
using DOS, 33
Communication, 33
Communication cables, 5
connecting, 9
ordering, 3
Communication interface. See RS-232C interface or
Parallel interface
Compressed pitch sample characters, 85
Connecting cables
cash drawer, 8
communication, 9
power, 9
Connector
cash drawer, 36, 40
parallel communication, 40
power, 36, 40
RS-232C communication, 36
Consumables. See Paper
—D—
Data buffer size
setting, 26
Data error handling
setting, 26
Data scope mode, 30
Default lines per inch
setting, 28
Density, of print, 84
Diagnostics, 25
knife failure, 32
level 0, 25
level 1, 26
level 2, 32
level 3, 32
paper out, 32
power voltage low/high, 32
printhead over/under temperature, 32
receipt cover open, 32
startup, 25
Dimensions, of printer, 6, 82
DIP switches. See Switch settings
DOS
sending commands, 33
Dot patterns, of characters, 85
DTR/DSR protocol, 35
Duty cycle limitations, 84