Chapter 4: Diagnostics
7193 Owner’s Guide
August 1998
30
DIP switch 1 must be Off to return the printer to the on-line mode.
6.
Turn the printer back on.
Running the Data Scope Mode
This test prints a hexadecimal dump of all data sent to the printer: “1” prints as
hexadecimal 31, “A” as hexadecimal 41 and so on. This helps troubleshoot communication
problems and runs during a normal application (after being enabled in level 1 diagnostics).
Enter the Data Scope Mode
Note:
The operator panel may differ depending on the model. To turn the printer on or
off, (on-line or off-line), use a paper clip or other pointed object to depress the plunger (in
place of the On Line button) on models with that item.
Caution:
The DIP switches are pre-set at the factory and should generally not be changed.
If you must change them, do so carefully to avoid changing other functions.
1.
Turn the printer off.
2.
Turn the printer over and note what the current DIP switch settings are.
3.
Set the switches to the settings in the table.
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Switch 6
On
Off
Off
On
Off
On
4.
Turn the printer on to enter the settings into the EEROM and enable Data Scope Mode.
The On Line light (green) blinks.
5.
Turn the printer off and set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.
6.
Turn the printer back on.
The printer is on-line and can communicate with the host computer.
7.
Run a transaction from the host computer.
All commands and data sent from the host computer will be printed as hexadecimal
characters as shown in the illustration.
Exit the Data Scope Mode
1.
Turn the printer off.
Summary of Contents for 7193
