NCR 7156, Owner'S Manual, Page: 90 / 138

Chapter 6: Commands 7156 Owner’s Guide
September 1997 84
Status Byte (RS-232C)
Bit Function 0 Signifies 1 Signifies
0 Receipt Paper Ok Low
1 Receipt Cover or Front Cover Closed Open
2 Receipt Paper Ok Out
3 Always Zero
4 Always Zero
5 Slip Leading Edge Sensor Not Covered Covered
6 Slip Trailing Edge Sensor Not Covered Covered
7 Always Zero
Transmit Printer ID
Transmits the printer ID specified by n.
Hex Decimal ASCII Value of n
1D 49 n 29 73 n GS I n
1-3
49-51
The values of n are specified in the following two tables. When n is out of the specified
range, this command is ignored.
n Printer ID Specification ID (Hexadecimal)
1, 49 Printer model ID NCR 71563 0x26
2, 50 Type ID Installed options refer to next table
3, 51 ROM version ID ROM version 0x00
Type ID (
n = 2)
Bit Off/On Hex Decimal Function
0 Off
On 00
01 0
1 No two-byte character code installed.
Two-byte character code installed.
1 Off
On 00
02 0
2 No knife installed.
Knife installed.
2 - - - Undefined.
3 Off
On 00
08 0
8 No MICR check reader installed.
MICR check reader installed.
4 Off 00 0 Not used. Fixed to Off.
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.