NCR 6932, User Manual, Page: 57 / 108

Configuration 3-45
Linux Command Line Flash and Configuration Update
Utility
The Linux Command Line Flash and Configuration Update Utility gets the current
keyboard firmware version and installs firmware and keymap updates to the keyboard
using a command prompt.
This utility has two versions, for a 32-bit system and a 64-bit system, make sure to use
the correct version for your system.
The "libusb" library is required to use Command Line Flash and Configuration utility.
To install the libusb library, perform the steps below:
1. Add the "oss" repository. Enter the following command:
zypper addrep
http://download.opensuse.org/distribution/11.4/repo/oss/ oss
2. Search if the libusb library is present or not in the oss repository. Enter the following
command:
zypper search --repo oss | grep libsub
3. Install the libsub0-1.0-devel library. Enter the following command:
zypper install libusb-1_0-devel
To upgrade the firmware and keymap or get the firmware version using this utility, run
the program as Root using the command format listed below.
• To get and check the current firmware version, enter the following command:
./update 1-v
.
• To upgrade the keyboard firmware, enter the following command:
./update 1 1 <firmware_bin_file_name>
• To upgrade the keyboard keymap, enter the following command:
./update 1 2 <keymap_dat_file_name>