NCR 6932, User Manual, Page: 50 / 108

3-38 Configuration
Diagnostic
•
Enter Test Mode
—displays the position of the key when the key is pressed.
Note: If the keyboard provides the Keylock feature and the Repeat Enable option is
activated, the application continuously outputs the Keylock position to the terminal.
To stop this continuous output, press any other key.
• Exit Test Mode —exits the test mode.
•
Load Factory Setting
—reloads the default factory setting to the keyboard.
Note: After reloading the factory settings, reconnect the keyboard and close the
application.
• Reset —resets the keyboard.
Note: This feature is applicable only when testing the keyboard.
• Firmware Version —displays the current version of the firmware.
•
Get Status
—displays the Keylock and drawer status of the device.