Power Connections
3-6
Basic Installation
2. A 115-volt power transformer that requires a line cord and two 115-volt
line cords, one line cord for the power transformer and one for the
monitor. (See Figure 3-4.)
The line cords are
UL
Listed and
CSA
Certified cord sets rated minimum 7
amps, 125 volts, which consists of minimum
18 AWG
,
type
SVT
or
SJT
,
three
conductor cordage maximum 15 feet in length, terminating in a
NEMA 5-
15P
plug
.
3. An optional Y-cable. If you have this option, see either “Installing Optional
Equipment in the Space-Saver Base” on page 5-1 or “Installing Optional
Equipment in the Monitor Support Base” on page 6-1.
Power Connections for Outside the USA
If you ordered your
NC
for use outside the
USA
, you received either the
optional Y-cable with a power transformer and one line cord or the following
items: power transformer that requires a line cord for your voltage and two
line cords. (See Figure 3-4.)
The line cords are rated minimum 10 amps, 250 volts, with the appropriate
safety approvals for the country in which the equipment will be installed. The
cordage should be marked
<HAR>
and terminate in a grounding type
attachment plug. If you are in the
UK
, see “Power Cord for the UK” on page 3-
7.”
If you have the optional Y-cable, see either “Installing Optional Equipment in
the Space-Saver Base” on page 5-1 or “Installing Optional Equipment in the
Monitor Support Base” on page 6-1.
Line cord (115-volt shown)
Power transformer (varies with voltage)
Figure 3-4 Transformer and Line Cord
To NC
Summary of Contents for Explora 450 Series
Page 6: ......
