NCD Explora 450 Series, Installing Instructions

Page: 48 / 62

Installing Additional Memory
6-8 Installing Optional Equipment in the Monitor Support Base
To install the
SIMM
(s):
1. Orient the
SIMM
so that the notch is facing towards the back of the logic
board. (See Figure 6-6.)
2. Insert the
SIMM
into the slot at about a 45-degree angle. (See
Figure 6-7.)
3. When you are certain the
SIMM
is inserted all the way, press down on both
ends of the
SIMM
until it clicks into place. The
SIMM
should go past the
metal tabs on each end of the slot.
The
SIMM
should lie at about a 25- to 30-degree angle in the slot.
Notch
Slot SIMM
Figure 6-6 Orienting the SIMM
Figure 6-7 Inserting the SIMM