NCD Explora 450 Series, Installing Instructions

Page: 49 / 62

Installing Additional Memory
Installing Optional Equipment in the Monitor Support Base 6-9
Removing SIMMs
To remove a
SIMM
:
1. Use your two forefingers or your thumbs to pull back on the two metal
tabs located on each end of the
SIMM
slot. (See Figure 6-8.)
2. As you pull back on the tabs, the
SIMM
pops up past the metal tabs. (See
Figure 6-9.)
3. Hold the
SIMM
on both ends and remove it from the slot.
Metal tab
Metal tabs
Figure 6-8 Metal Tab Locations
Hold SIMMs on
edges
Figure 6-9 Removing the SIMM