Installing Additional Memory
Installing Optional Equipment in the Space-Saver Base
5-1
5 Installing Optional Equipment in the
Space-Saver Base
This section describes the installation of the Explora 400/450’s optional
equipment for the space-saver base. If you have the monitor support base, see
“Installing Optional Equipment in the Monitor Support Base” on page 6-1.
The optional equipment is shown in Figure 5-1.
If you are installing additional memory, do so before doing Section 3, “Basic
Installation,” on page 3-1.
Installing Additional Memory
You can add memory to your
NC
at any time. You may purchase it from
NCD
or other vendors. Only
SIMMs
supplied by
NCD
are covered under
NCD
’s
warranty. Contact
NCD
Technical Support for information about approved
vendors.
In the standard configuration, Explora 400 has 8
MB
of fast-page mode
memory and the Explora 450 has 8
MB
of
EDO
(extended data out) memory.
Adding more memory does not improve
NC
speed.
PCMCIA card
Memory SIMM
Figure 5-1 Optional Equipment
PCMCIA
The space-saver base also has an
option consisting of a security device,
a wall mounting bracket and an
installation instruction sheet.
Power Y-cable
Summary of Contents for Explora 450 Series
Page 6: ......
