NBN FLIR A6 Series, User Manual

Page: 24 / 126

Connectors, controls, and
indicators
11
11.1 Explanation
1. Network cable with an RJ45 connector for Ethernet connectivity and Power over
Ethernet (PoE) (dependent on the camera model).
Note Only CAT-6 Ethernet cables should be used with this camera.
2. Power cable for 12–24 V DC power in.
Note The power connector on the camera is polarity protected.
3. USB cable with a USB mini-B connector for control and image transfer.
4. Digital I/O ports, opto-isolated (six-pole screw terminal).
A. Hardware reset button (for a factory default reset).
Use a straightened paper clip or a similar tool to press the reset button through the
small hole on the back of the camera for 5 seconds, then release the button.
B. Power indicator.
#T559950; r. AD/35720/35720; en-US 16